
Concox We Track2
Concox We Track2 is a compact GPS vehicle tracker with a wide voltage range, making it suitable to run well on electric cars, motorcycles, cars and trucks. The We Track2 GPS tracker features SOS calls, remote fuel/power cutoff, geofencing, speeding alerts, historical data upload, and more.
Server Connection
- Indian Region 52.74.44.145
- Rest of the World 15.184.246.16
- Server Port 8500
General Information
- Purpose Vehicle
- Weight 38 g (1.34 oz.)
Connectivity Information
- Network Signal Level Yes
- Network Operator Id Yes
Locational Information
- GNSS Signal Level Yes
- LBS Yes
Features
- odometer Yes
- Remote outputs control Yes
Interfaces
- Discrete Inputs 2
- Number of outputs 1
Highlights
- Geofencing
- Parking mode
- Device timezone
Events Monitored
- Deviation from the route
- Distance between objects
- Engine excessive idling
- Entrance or exit from geofence
- Excessive driving
- Excessive parking
- External power cut
- Inputs triggering
- Location report on demand
- Low battery
- Parameter in range
- Parking state detection
- Pressing SOS button
- Speeding (platform related)
- State field value
- Task status change
- Tracker switched OFF or lost connection
- Unauthorized movement
Check Out Other Devices By AVL Devices
-
Meitrack MVT100
The Meitrack MVT100 is a fancy vehicle tracker that works well for motorcycles, yachts and boats. The tracker is super easy to install due to the presence of magnets, water-resistant (IP66), dustproof and built-in antennas. The MVT100 is embedded with a GPS chip but doesn’t support assisted GPS technology. And since it comes with a Quad-band GSM module, it can be used worldwide.
-
Meitrack T1
Meitrack T1 is a commendable GPS tracker for vehicles as it has a digital interface required to install cameras, LED/LCD displays and more. The device has GPS and GSM antennas that provide accurate tracking for about 10 meters. The tracking mode is flexible and can be configured according to distance, time and angle. If there is no movement, the Meitreack M1 vehicle tracker sends data every 180 seconds.
-
Ruptela FM- Eco3
Ruptela FM-Eco3 is a Terminal with GPS/GSM connectivity, which allows it to determine the object’s coordinates and transfer them via the GSM network. This Terminal is best applicable where location acquirement of remote objects is needed. FM-Eco3 has additional inputs and outputs for controlling and monitoring other remote objects.
-
Ruptela FM-Eco4 light+ T
Ruptela FM-Eco4 light+ T is a 2G tracking device with an internal battery, regular casing, small size, and internal antennas. The device features 4 digital inputs, 2 analogue inputs, 2 digital outputs, a 1-Wire interface, a 3-axis accelerometer, sleep mode and deep sleep mode, and more.