Meitrack MVT600
Meitrack MVT600 is a GPS vehicle tracker that comes with a digital interface supporting the installation of the camera, LED and LCD displays. The device has a microphone and speaker for voice communication. Vehicle tracker MVT600 can work for 10 hours in active mode without a recharge.
Server Connection
- Indian Platform 52.74.44.145
- Rest of the World 15.184.246.16
- Server Port 8648
General Information
- Purpose Vehicle
- Weight 220g (7.76oz.)
Connectivity Information
- Network Signal Level Yes
- Network Operator Id Yes
Locational Data
- GNSS Signal Level Yes
- LBS Yes
Features
- Remote Outputs Control Yes
- Odometer Yes
- Hardware Key Yes
Interfaces
- Discrete Inputs 3
- Number of Outputs 3
- Analog Sensor Yes
Highlights
- Geofencing
- Parking Mode
Events Monitored
- Deviation from the route
- Distance between objects
- Driver change
- Engine excessive idling
- Entrance or exit from geofence
- Excessive driving
- Excessive parking
- Fuel level change
- GPS antenna cut
- Inputs triggering
- Low battery
- Outputs triggering
- Parameter in range
- Parking state detection
- Pressing SOS button
- Speeding (platform related)
- State field value
- Task status change
- Tracker switched OFF or lost connection
Check Out Other Devices By AVL Devices
-
Meitrack MVT100
The Meitrack MVT100 is a fancy vehicle tracker that works well for motorcycles, yachts and boats. The tracker is super easy to install due to the presence of magnets, water-resistant (IP66), dustproof and built-in antennas. The MVT100 is embedded with a GPS chip but doesn’t support assisted GPS technology. And since it comes with a Quad-band GSM module, it can be used worldwide.
-
ATrack AS1
ATrack AS1 is a GPS tracker designed for monitoring mobile assets for GPS for locational tracking and GPRS/HSPA/CDMA for data communication. The AS1 GPS tracker is IP67-approved, making it optimal as it protects against temperature, dust and water spray.
AS1 has a primary battery life of up to 3 years, making it ideal self-contained hardware for long-term deployment.
-
Ruptela FM- Eco3
Ruptela FM-Eco3 is a Terminal with GPS/GSM connectivity, which allows it to determine the object’s coordinates and transfer them via the GSM network. This Terminal is best applicable where location acquirement of remote objects is needed. FM-Eco3 has additional inputs and outputs for controlling and monitoring other remote objects.
-
Ruptela FM- Eco4+
Ruptela Eco4/4+ is the fourth generation low cost, low power consumption basic tracking device. The GPS tracker acquires its position by GPS/GLONASS signal and transfers data to the server via the GPRS cellular network.
Eco4/4+ comes with an internal power supply, waterproof housing and a power supply from USB for configuration purposes.